Custom Manufacturing

3T-AM’s Production Shift: Repeat Orders, Machining Discipline and Order-Backed Capacity

Ines FarkasNovember 16, 20265 min read0 views

At a glance

  • The Newbury metal AM supplier is balancing a 70% production revenue base with new product work, in-house machining and printer investment tied to customer programmes.
  • 3T-AM says repeat production orders now provide around 70% of revenue while new product introduction still absorbs roughly 80% of team time. Its response combines product-owner accountability, in-house CNC machining, order-backed printer investment and a planned digital product passport for embodied carbon by 2028.
A conceptual metal additive manufacturing production floor shows printers, a CNC machining area and an inspection table, illustrating the move from one-off prototypes toward repeatable production.

3T-AM’s move from prototype work to production is less a story about a single machine than about how orders, roles and customer measurements change when a buyer asks for the same metal part again. Commercial director Eddie Andrews, who joined the Newbury manufacturer in November 2021, frames the shift with a deliberately unglamorous question: how do you make the work boring enough to repeat at an agreed price and on schedule? The company now says repeat orders generate around 70% of revenue, while new product introduction still takes up roughly 80% of the team’s time.

That split is the central tension in 3T-AM’s production strategy. A healthy order book supports investment, but it also occupies the capacity needed to qualify materials and develop future work. Andrews’s account, given as part of 3D Printing Industry’s AM UK series ahead of Formnext 2026, describes a manufacturer trying to keep both sides of that equation visible rather than treating production as a simple upgrade from prototyping.

From prototype logic to production logic

The company dates its business to 1997 and recalls its first metal machine arriving around 2008. By the 2021 reset, years of accommodating individual prototype jobs had left a shop floor with process after process. 3T-AM narrowed its customer base, gave larger accounts more influence over what it developed and simplified procedures that had accumulated. Much of the work remained manual while the team established which operations it could reliably repeat. In that reading, production discipline began with deciding what not to do as much as with buying faster equipment.

The change also touched ownership. Previously, the first person to see a drawing was often the engineer responsible for printing it, so the natural question was how to print the part; decisions at that point shaped the work handed to everyone else. Today a product owner is responsible for delivering the finished component, and print and machining specialists agree on the condition of the part as it passes from one operation to the next. This is a modest organisational change, but it addresses a familiar additive manufacturing problem: a part can be printed well and still fail as a delivered component if downstream steps are not specified around the finished requirement.

Machining is part of the production system

Andrews’s formulation is blunt: to become a successful additive manufacturer, a company needs to be a really good CNC machining company. Bringing machining in-house gave the SME more control over costs, quality and delivery dates. Larger multi-laser machines improved productivity at the printing stage. Neither investment on its own, however, could tell a customer when a finished part would arrive. The production proposition therefore depends on the handoff between printing and machining, not on metal printing as an isolated capability.

The commercial transition was harder to time. Production orders rose and then tapered off. Turning away too much prototype work during the upswing would have left gaps when it eased. Repeat orders now give 3T-AM room to choose which development jobs to take, though some will never become production contracts. Andrews’s point is that participation in a customer’s development journey is how a supplier finds out whether a production opportunity exists; the order book provides the stability to take that risk selectively.

Buying capacity against demand

Austrian precision manufacturing group SBO acquired 3T-AM in October 2025. The Newbury business had generated around £5 million in sales in 2024. SBO brought experience in machining downhole drilling equipment, including components up to ten metres long, and was interested in 3T-AM’s metal printing expertise and access to a different set of industrial customers. SBO approved a five-year business plan, and Andrews recalls the board asking whether it could be done quicker. In August 2026, the group reported that 3T-AM had added an EOS M400 in the second quarter, ordered another printer and invested further in post-processing as part of a seven-printer expansion across UK and US operations.

A full order book makes the next machine easier to justify. It also leaves little time on that machine to qualify a different material or develop a new product. Andrews wants to preserve two distinct reasons to invest: contracted demand, and the work 3T-AM cannot yet offer. The distinction matters because capacity utilisation alone can look like success while narrowing the supplier’s future options. A pre-pandemic aerospace enquiry illustrates the scale of commitment involved: a single family of parts would have required 16 multi-laser systems to cover only a share of the requirement. From the buyer’s side, the question was how many suppliers had the floor space, capital and capacity to take it on. Andrews sees that as one reason original equipment manufacturers still keep sizeable additive programmes in-house.

What the customer can measure

For some customers, replacing a casting with a printed part earns its keep through lead time alone. A legacy or development programme can obtain a component sooner even at much the same unit cost. At higher volumes the calculation gets tougher. Machine maintenance contracts and consumables weigh on the hourly rate, and a factory working a single shift has fewer productive hours over which to spread those costs. Andrews sees scope to learn from CNC shops that operate around the clock. One place he would look for automation is support removal, where the process can still depend on what an experienced operator knows about a particular job.

Customer value is also becoming a documentation question. A project with Honeywell Aerospace, under an Aerospace Technology Institute-funded programme, is converting an existing conventionally manufactured component to additive. The sustainability team at the NCC in Bristol is carrying out a 12-month life-cycle assessment covering manufacture, service and end of life. Printing closer to the finished shape should use less feedstock and leave less metal to machine away than starting with billet. The study will compare the two manufacturing routes alongside any benefit the redesigned component delivers in service.

The next test: evidence as part of the order

The intended outcome in Newbury is something a purchasing department could use. As 3T-AM connects its factory and enterprise systems, it is developing digital product passports to document the carbon associated with making an individual component. By the end of 2028, Andrews wants that information to come with every part at no extra charge. For a customer compiling a supply-chain emissions report, it would become one more thing they could expect from a routine order.

That ambition returns the discussion to the original question about boring manufacturing. Repeatable production is not only a matter of keeping printers busy. It requires clear ownership of the finished part, agreed conditions between operations, machining capacity that can be scheduled, and evidence that a customer can use. 3T-AM’s experience suggests that the transition from prototypes to production is less a threshold than a continuing balance between contracted demand and the development work needed to earn the next order.

Reported by Ines Farkas, Tool Quality and Sourcing Analyst.