Custom Manufacturing

Ahead of Formnext 2026, UK Additive Manufacturing Confronts Its Commercialisation Gap

Zora MarinkovicNovember 16, 20265 min read0 views

At a glance

  • Machine builders, spin-outs and public buyers explain what separates British additive manufacturing research from repeat production orders.
  • Britain holds a strong research and patent position in additive manufacturing but a thin installed industrial base, and founders say grant structures, university equity terms and uncertain public procurement make the step to production harder. Ahead of Formnext 2026, where the UK is partner country, the open question is who ends up making the parts.
A conceptual view of a British metal additive manufacturing workshop, showing an industrial printer, finished parts and a wooden pulley block that echoes the article's industrial history.

Britain will be partner country at Formnext in Frankfurt from 17 to 20 November, and the timing invites an uncomfortable question. The country that helped pioneer industrial mass production still generates a great deal of additive manufacturing research. What it has not reliably done is turn that research into factories that win repeat orders, train operators and keep production at home.

The historical comparison is Portsmouth Dockyard. Three centuries after Henry VII ordered a dry dock there in the 1490s, the Royal Navy was buying roughly 100,000 wooden pulley blocks a year, and a single ship such as HMS Victory needed more than a thousand. In 1803 the first set of block-making machines designed by Marc Isambard Brunel and built by Henry Maudslay began operating, with the Admiralty approving a second set that May; by 1808, 45 machines were producing 130,000 blocks. The invention usually gets the credit, but the customer's engineering judgement mattered as much: the Navy knew which sizes it used and in what quantities, and could watch the first machines work before committing to the next set.

That pattern, a buyer who can specify, watch and then scale, runs through the British additive manufacturing businesses interviewed ahead of the show.

Invention is not the missing piece

The evidence of British invention is not in doubt. The European Patent Office counted 1,925 international patent families in additive manufacturing originating in the UK between 2001 and 2020, close to France's 1,938. Additive Manufacturing UK's 2026 annual plan put the UK market at between £515m and £740m in 2024, or 3% to 4.3% of the global total. Neither figure says much about where the resulting production happens. A patent family records an attempt to protect an idea; a market estimate can include machines bought from overseas suppliers.

British machine builders keep exporting capability. Wayland Additive's chief executive, Will Richardson, points to metallurgy and materials science strengths at Sheffield, Birmingham, Cambridge and Oxford, and to the Henry Royce Institute. In October a Calibur3 metal system left Wayland's Huddersfield facility for the University of Innsbruck, where Austrian researchers intend to study difficult materials, including those meant for high temperatures. Alloyed, which began in Oxford materials research, licensed a cast nickel alloy to Hitachi Metals in 2018, later opened facilities in Abingdon and Seattle, and sold its first flight parts from Seattle in 2023.

What happens when the grant ends

Jake Hand, co-founder of Exeter-based Rapid Fusion, describes a gap that opens at the end of a publicly funded project. The company, which grew out of distributor Evo 3D and now builds large-format additive systems, is profitable without R&D funding, but Innovate UK support has let it develop its own technology and share costs. His criticism is that funders back a project rather than a business: the award buys engineering time to solve a defined problem, while the customer arrives with a different set of questions about moulds, operator training and what happens if a machine stops mid-job. Answering those for one sale can absorb months, and a further competition rewarding technical novelty gives engineers a reason to design something else.

Innovate UK does fund later-stage work such as customer validation, initial tooling and production preparation, but general business costs fall outside its scope, a distinction that matters when a small firm must choose between an engineer to finish development and someone to find the first customers.

Where a graduate bridges the gap, the result is concrete. At Kingston University, a former student named Raghav joined Rapid Fusion and pressed his employer and his old department to meet, according to operations manager Lesley Stigling. The outcome was a £450,000 Zeus robotic cell at the Roehampton Vale campus that combines large-format printing with CNC milling. The university can bring work in-house and teach on the equipment; the manufacturer has a reference installation.

Equity, spin-outs and the first investor

Ownership terms are another gate. John Robinson, additive manufacturing research commercialisation manager at the University of Wolverhampton, incorporated a company in May 2017 that funded his PhD and filed several patent applications with the university in 2024. His research includes multi-material devices that carry heat away from data-centre equipment. He recalls the former technology transfer office wanting 75% of the company; more recent talks with the enterprise team concerned a potential 10% stake. National data point the same way: the Royal Academy of Engineering and Dealroom found that, among UK deep-tech hardware spin-outs in their sample, the average non-cash stake taken by universities fell from 25% in 2015-19 to 14% in 2024-25, though the 2025 figures were partial.

Louis Masters has cleared the first threshold. Hydra Manufacturing, a University of Leeds spin-out developing equipment for technical ceramics, announced £320,000 in equity investment led by SFC Capital in March; with earlier grant support it had secured about £577,000. Masters was then weighing a round of around £1m or more, knowing that investors want to see two more installations, proof that a customer will put a machine on a factory floor, while finding those customers consumes the capital he is trying to raise. Germany, with its concentration of advanced ceramics manufacturers, is a natural early market, and where those first customers sit will shape which applications his team develops.

The doing, and the installed base

Richardson identifies a constraint the usual commercialisation narrative misses: without doing the work, a company does not get good at it. Britain's installed base of industrial equipment is limited, and in some of Wayland's markets major customers willing to put work through it are scarce. The effect shows in recruitment: a CNC machinist can learn an additive system, but where few factories run the equipment, each firm must do more training itself. Holdson's Paul Tickle notes the difference in recruits who used industrial equipment during apprenticeships, and Robinson describes keen student designers at Wolverhampton alongside a foundry training centre that attracts fewer young people.

Renishaw's Ben Deary and Ed Littlewood describe what happens when production is brought back after years of buying overseas: a machine is commissioned and operators hired, only to find a former supplier of a component or service has gone. They cite Apex Additive Technologies, a Welsh business that develops process parameters, makes first parts and proves a process before a customer takes production in-house. Fastech managing director Jason Hutt points to the incumbent's advantage, casting already approved to an agreed specification, while an additive replacement may need evidence specific to the equipment, process and grade, and a second buyer may ask for much of it again. At 50 parts the arithmetic differs sharply from 5,000. The £38m Airbus-led DECSAM programme, with Renishaw, GKN Aerospace, Apex and the Manufacturing Technology Centre among partners, is one attempt to share that cost in civil aerospace through demonstrators and qualification guidance.

Where the customers are

Demand matters as much as capability. At a Manufacturing Technologies Association briefing at the House of Lords on 12 November, CloudNC chief operating officer Jason Bowes said selling the company's AI-assisted CNC programming software in the US is far easier than at home, though it is tested in its own British factory. Craig Pyser, AMUK chair and chief executive of AMufacture, estimates 95% to 98% of the company's work is now production; it began in marine, and defence has become its largest sector, with marine and automotive significant. Defence customers may revise designs every six to eight weeks, so a local manufacturer able to take a revised file and deliver the next batch can win repeat orders while the product changes. When one customer took some production in-house, AMufacture helped commission the printer; two years later the customer sold it back, having found software, staff and post-processing dearer than expected.

What the state can buy

James Selka, chief executive of the Manufacturing Technologies Association, told the same Lords briefing that investment was ready to enter British manufacturing but needed a clear demand signal and government co-investment, with energy prices the first obstacle. Lord Harrington of Watford, chair of Make UK and a former business and industry minister, noted a limit of the sector deals pursued under Theresa May: in aerospace and life sciences companies could match public money, while elsewhere some firms the government wanted to encourage could barely afford their share. He also chaired GeoPura, the hydrogen power business that ended up being sold to Canada's Ballard Power Systems for £275m upfront in August.

Procurement is where Harrington sees direct government influence. In 2025 the UK Atomic Energy Authority commissioned two additive systems at its Central Support Facility: a Freemelt electron-beam machine for tungsten work and a Nikon SLM laser system supplied by Kingsbury Machine Tools with support from Additure. Separate fusion maintenance projects drew contributions from Laser Additive Solutions, The Welding Institute and WAAM3D on inspection and repair. UKAEA publishes a quarterly procurement pipeline separating possibilities over one to five years, pre-commercial work and confirmed requirements. For a machine builder the decisive question is when the next equipment specification is drawn up; for a repair specialist, whether development work becomes a maintenance contract.

At Portsmouth, the Admiralty could specify block sizes before Brunel's last machines were built. A supplier eyeing a future fusion plant faces a far less certain timetable. Pyser has his own measure of the Frankfurt show: an overseas company choosing Britain as its European base would count, and a year from now it will be worth asking exhibitors whether a visitor ordered a British-built machine and whether a first installation led to a second. Brunel got his answer in May 1803.

Reported by Zora Marinkovic, Castings, Forgings and Powder Metallurgy Editor.