Bering Yachts has presented the first hull of its BC60 aluminium explorer catamaran, a twin-hull design that carries the long-range and structural priorities of the yard’s established explorer line into a new platform. The 18.9-metre vessel has been delivered and is afloat, and founder and CEO Alexei Mikhailov gave a detailed walkthrough of its layout and systems.
The BC60 measures 18.9 metres overall with an 8.6-metre beam. Bering positions it as a displacement explorer rather than a high-speed production catamaran; its all-aluminium construction, shallow draft and large fuel capacity are intended for extended passages and greater autonomy at sea. The draft is 1.58 metres, and more than 13,500 litres of fuel support a range of over 3,500 nautical miles at a cruising speed of 8 knots. Fresh-water capacity is approximately three cubic metres, while grey-water and black-water tanks each hold 1,500 litres.
Twin-hull platform built around systems access
Mikhailov said the company applied the range, reliability, quiet running and self-sufficiency proven on its B72 and B88 models to a catamaran platform. He described the BC60 not as a leisure catamaran but as a displacement exploration machine.
The design uses unusually deep sponsons to house a two-level engine-room arrangement. Bering says this gives accessible space for generators, watermakers, sewage-treatment equipment and other onboard systems, while helping isolate noise and vibration from living areas. Protected running gear and attention to structural integrity are also part of the safety-oriented approach. The aluminium construction and resulting weight distribution allow a fully enclosed flybridge that serves as a second salon.
Accommodation and enclosed flybridge
On the main deck, the salon includes a full helm station with 360-degree visibility. A professional galley is arranged on both sides of the space and equipped for practical onboard use. One sponson contains the master room, with space to walk around the bed, panoramic windows, a walk-in wardrobe and an en-suite bathroom with a full shower. The opposite sponson holds two guest cabins, each with its own bathroom.
The layout also provides a dedicated crew cabin, laundry and pantry areas, additional refrigeration capacity and extensive storage throughout. Bering says these features support extended stays aboard, whether the catamaran is owner-operated or managed by a small professional crew. Above, the enclosed flybridge has a bar, refrigeration, a day bathroom and 360-degree visibility. It can be configured as a lounge, gym or office, adding flexibility for life and work at sea.
Comfort and range in an explorer format
Onboard comfort is central to the BC60’s expedition-focused design. Mikhailov highlighted low sound and vibration levels at cruising speed, together with the storage capacity and onboard systems intended to support self-sufficiency during long passages. With more than 3,500 nautical miles of range, a shallow draft and all-aluminium construction, the catamaran combines long-range explorer requirements with the additional space of a twin-hull platform.
The delivery and launch of the first hull mark the practical realisation of Bering’s approach to a twin-hull explorer, extending design principles established in the B72 and B88 to a new vessel format.
