Large-part machining usually points manufacturers toward a large CNC machine tool. Fives High Precision Machines (Fives HPM) is challenging that assumption for a defined band of work with the Liné Machines RoboTDM, a robotic system that carries milling, trimming and drilling tools to the workpiece rather than moving a large component into a machine envelope.
The distinction matters because not every large part needs ultra-high precision. Fives HPM targets applications where tolerances down to approximately 0.1 mm are acceptable. In that range, it argues, a robot equipped with a specialized end effector can remove material directly and avoid the cost, footprint and programming burden associated with a large CNC machine.
Bringing the tool to the part
RoboTDM is part of Fives' Material Removal (MR) business line. Its end effector combines a spindle, toolholder and cutter, allowing the robot to perform operations on large workpieces. Potential uses include face milling and deburring, such as removing burrs from castings or trimming excess weld beads. Fives also cites drilling pilot holes in large aerospace panels and automotive body parts, along with trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications.
The process logic is straightforward: instead of bringing the entire component into a large machine, the machining capability is brought to the component. Fives says this approach can shorten setup and simplify programming for suitable applications. The company's multi-year R&D project and development trials demonstrated cycle-time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings. Those figures are company development results, not a guarantee for every part.
Closing the accuracy gap
The central technical obstacle has been robot accuracy. Industrial robots offer flexibility, but conventional systems typically achieve tolerances of around 0.3 mm, which is insufficient for many machining tasks. Fives focused its development on high-precision robotic machining (HPRM) to narrow that gap.
The approach combines robot calibration with advanced look-ahead and motion-planning algorithms. According to Fives, the system can process programs containing more than one million points without the latency that can otherwise compromise robot motion. The result is smoother trajectory execution intended to support multi-axis contouring and complex machining operations in a way that is more closely comparable with CNC machining. Fives says RoboTDM can reduce machining deviation up to 100 μm (0.1 mm), a threefold improvement over conventional robotic accuracy.
That improvement changes the application range, but it also defines the boundary. RoboTDM is aimed at work where roughly 0.1 mm is sufficient. Where tolerances tighter than 0.1 mm are necessary, Fives states that a high-precision CNC machine remains the appropriate choice. The system is therefore complementary to Liné Machines and the wider Fives HPM portfolio, not a replacement for all large CNC machining.
Configuration and integration
The machining end effector can be configured with different spindle sizes, power ratings, torque and speed. Available systems can provide spindle power up to 125 kW, torque up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. These options allow the package to be matched to the task rather than forcing every application into one standard configuration.
RoboTDM can also incorporate automatic tool changing, tool measurement, tool-breakage detection and part probing, while a vision system can support drilling applications. Machining is not the only process the platform can accommodate. Fives says RoboTDM systems are configurable for waterjet cutting, laser profiling and ultrasonic cutting as well. Multiple workstations and customized peripheral equipment are possible, and relatively modest foundation requirements simplify installation compared with a large CNC machine tool, according to the company.
Where the economics fit
The physical flexibility of a robot is valuable when components are too large or awkward to justify moving through a conventional machine tool. Fives identifies aerospace, defense, maritime and energy as sectors where component dimensions can be substantial and production requirements vary considerably. In those settings, a reconfigurable robotic setup may offer a different balance of capital investment, installation effort, flexibility and cycle time than a large fixed machine.
The development also reflects how Fives HPM is presenting its combined portfolio. RoboTDM is described as another interpretation of the group's 'precision at scale' cross-brand mantra: scale refers to finding a smarter way to manufacture large components while applying the accuracy level the application demands. The Liné Machines brand contributes experience in large-scale milling and material-removal processes. Fives says the development originated directly from customer requirements, reflecting an engineering approach built around specific manufacturing challenges rather than forcing applications to fit standard equipment.
Fives Liné Machines Inc, now part of Fives HPM, has had a North American presence for almost 50 years through its facility in Granby, Quebec, Canada. The plant produces Liné CNC machine tools and robotic solutions, including RoboTDM, and the site supports engineering, integration, automation, service and training across equipment lifecycles.
For manufacturers, the significance is a third option between conventional robotics and a large CNC machine tool. For the right component, Fives says RoboTDM can mean lower capital investment, simpler installation, greater flexibility and dramatically shorter cycle times. The qualifier is technical and specific: the part must fit the accuracy band, and the application must tolerate the difference between a robot-mounted tool and a high-precision CNC platform.
