Fabrics & Textiles

HAMS Garments reports 78.1% CO₂ cut and earns WCES Certificate

Farah Al-MansouriNovember 1, 20265 min read2 views

At a glance

  • An existing Bangladesh apparel plant reached the result through equipment upgrades, a 550 kW rooftop solar array and operational controls rather than new construction.
  • HAMS Garments Ltd. says it has reduced CO₂ emissions by 78.1% at its 203,030 sq ft Bangladesh apparel facility and received the World Championship for Energy Savings Certificate, with a 75.25% overall energy saving and a 47.36% renewable energy share, alongside LEED v4 O&M Platinum certification.
Aerial illustration of a garment factory with a rooftop solar array and ventilation equipment, with a faint energy-flow line running from the panels into the plant.

HAMS Garments Ltd., an operating apparel manufacturing facility in Bangladesh, reports a 78.1% reduction in CO₂ emissions and has received the World Championship for Energy Savings (WCES) Certificate, a recognition the company says puts it among the leading contenders for the 2026 WCES Award.

The result came without replacing the plant. Instead, the facility pursued an operational transformation built on energy auditing, efficiency improvements, renewable energy, commissioning, metering, operational controls, preventive maintenance and staff engagement.

Starting from an existing plant

The building has a gross floor area of 203,030 sq ft (18,861.95 m²) and roughly 3,216 regular occupants. Because manufacturing runs continuously, energy demand is substantial and tied to production activity, lighting, ventilation, cooling, compressed air, pumps, motors and other building and process systems.

Rather than a single intervention, the site combined a coordinated package of measures identified and prioritised through ASHRAE Level 1 and Level 2 energy audits and ongoing assessment of building and production performance.

Efficiency measures and on-site solar

  • Upgrading and optimising energy-consuming equipment and systems
  • Improving lighting efficiency and trimming unnecessary electrical loads
  • Optimising motors, pumps and related equipment
  • Improving ventilation and cooling performance
  • Strengthening energy metering and sub-metering to expose consumption patterns and prompt corrective action

The largest single investment was a 550 kW on-site solar photovoltaic system, which the company says substantially reduced reliance on grid electricity and fossil-fuel-based energy. Renewable sources now account for about 47.36% of the project's energy use, and the combined measures are credited with an overall 75.25% energy saving.

Holding the savings in place

Hardware is paired with an energy-management and optimisation system. Performance is tracked through metering, equipment trend reviews and building-management practice, allowing the facility team to detect abnormal consumption and operational inefficiencies. Ongoing commissioning, preventive-maintenance planning, equipment performance monitoring and defined operational responsibilities support periodic comparison of actual use against expected performance.

A Demand Response programme, including a 10% demand-reduction drill, is presented as evidence that the plant can actively manage electrical demand when the grid is under stress. Operating schedules and equipment use are reviewed to remove unnecessary loads while manufacturing requirements are met.

Staff practice as part of the system

The company states that technology alone cannot deliver lasting savings, so training, operational guidelines, employee engagement and responsible energy-use practices are written into the programme. Facility and maintenance personnel are trained in efficient operation, preventive maintenance, energy monitoring and corrective actions. Procedures encourage equipment to run only when required, unnecessary loads to be switched off, and energy-intensive activities to be managed without compromising production, safety or occupant comfort.

Employees are involved in the broader sustainability effort, supported by structured action plans, assigned responsibilities and periodic performance reviews.

Verification and replicability

The building achieved LEED v4 Existing Buildings: Operations & Maintenance Platinum certification with 108 out of 110 points, which the article presents as independent demonstration of the approach's effectiveness. HAMS frames the outcome as a model the apparel sector can repeat: large energy reductions can come not only from capital investment but from better operation, informed users and continuous performance management.

Reported by Farah Al-Mansouri, Fiber and Yarn Analyst.