Industrial Machinery

KraussMaffei Extrusion Introduces Single-Stage PVC InlineMixing for Roofing Membranes

Selene MarchettiNovember 17, 20265 min read0 views

At a glance

  • The continuous process removes the separate hot-cold mixing step, which the company says reduces energy use, floor space and labor requirements.
  • KraussMaffei Extrusion has developed a continuous single-stage process, PVC InlineMixing, that meters all PVC roofing membrane components directly into a twin-screw extruder. The company reports energy savings of up to 75 percent depending on conditions and says the process is already running on an industrial line with 1,800 kg/h throughput.
A cutaway concept view of a twin-screw extruder fed directly by gravimetric dosing units, with a calender forming a continuous PVC membrane into a roll in a factory setting.

KraussMaffei Extrusion has introduced a single-stage extrusion process for producing PVC roofing membranes and says it can lower energy use and manufacturing costs compared with the conventional two-stage route. The company describes PVC InlineMixing as a continuous alternative to batchwise dry-blend preparation followed by extrusion.

In the established two-stage method, PVC powder, plasticizers, additives and fillers are first processed batchwise in a separate hot-cold mixer combination to create a dryblend. The mixture is cooled and held in intermediate storage before being plasticized in a twin-screw extruder and formed into membranes. The new approach removes the separate mixing step: all solid and liquid components are metered directly into the extruder through gravimetric dosing systems.

Cost and energy profile

Because no separate heating-cooling-mixing combination is needed, manufacturers avoid that investment, and the material is heated only once. KraussMaffei says energy consumption and energy costs can fall by as much as 75 percent, a figure it qualifies as dependent on the formulation, the system parameters and the location.

The company also cites lower space requirements and labor costs from eliminating the separate mixing stage, along with reduced maintenance because wear parts for the heating-cooling mixer are no longer required. Combined lower capital expenditure and operating costs, it argues, improve overall cost-effectiveness and create the conditions for a quick return on investment.

Flexibility and validation

KraussMaffei also positions the process as more flexible. Formula adjustments and color changes can be implemented directly during operation through the integrated control system, which the company says removes the time-consuming preparation and interim storage of separate dryblend batches.

"For manufacturers of PVC roofing membranes, this represents a clear competitive advantage: lower production costs, greater flexibility and more efficient manufacturing," said Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion.

The process was developed at the company's Extrusion Technology Center in Laatzen and validated using industrial roofing membrane formulations on a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation components. The ZE BluePower series has a Da/Di ratio of 1.65; KraussMaffei says the combination of high torque and large free volume provides a wide process window for processing different formulations flexibly.

Tests confirmed gelation levels of the PVC and high product quality, according to the company, and the mechanical properties and weldability of the membranes met industrial requirements across several formulations. "At our Technology Center, we work with customers to test their specific formulations under production-relevant conditions, optimize the process and establish the basis for successful industrial implementation," Bartel said.

Industrial reference

PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. That reference plant reaches a total throughput of 1,800 kg/h using two extruders and two calenders, with PVC, additives and fillers, together with the resulting edge trimmings, processed continuously into finished membranes.

Reported by Selene Marchetti, Polymer and Specialized Machinery Analyst.